Product Description
Crystal Clear Protection for John Deere G-Series Skid Steers 🛠️
Give your cab the protection it deserves—without sacrificing visibility. Our 1/2″ clear polycarbonate front windshield is a direct OEM glass replacement for John Deere Large Frame G Series skid steers. Precision-molded for a factory fit, this door is engineered for maximum strength, operator safety, and long-term clarity.
🔧 Easy OEM Replacement – Zero Hassle
No need to drill or modify—each windshield comes thermoformed to match exact OEM dimensions with pre-drilled mounting holes, allowing for a quick bolt-on installation using your original hardware. Just remove your old glass, line up the new shield, and go.
🧼 Scratch-Resistant Clarity That Lasts
This windshield is coated on both sides with an advanced hard-coat finish to defend against scratches, scuffs, and wear from daily use. It resists fogging, yellowing, and chemical damage—making it the ideal long-term upgrade over factory glass.
🛡️ Strength You Can Count On
Made from impact-rated, optical-grade polycarbonate, this door is 250x stronger than glass and weighs only half as much. Whether you’re tackling demolition, forestry, or construction, this upgrade provides serious cab protection while reducing operator fatigue and noise.
💡 Built for Comfort and Visibility
The clear version offers unmatched visibility, making it ideal for low-light work, indoor use, or operators who prefer a non-tinted view of the job site. With better insulation than standard glass, it helps regulate cab temperature through all seasons.
🔩 Mounting Information
This windshield is designed to reuse your existing John Deere OEM mounting hardware. No additional brackets or fasteners are included. Be sure to remove the protective film before use—some product photos may show the film still in place.
✅ Fits the following John Deere G-Series models:
320G, 324G, 325G, 330G, 331G, 332G, 333G
Upgrade to clear, rugged protection—perfect for operators who demand strength, visibility, and reliability. Your machine deserves more than glass. 💥
Compatibility
✅ Fits the following John Deere G Series models:
320G, 324G, 325G, 330G, 331G, 332G, 333G
Media
Video coming soon…
Features
- Replaces OEM Part T344818
- Clear like glass
- Measurements: 9 Holes, 1/2″ Thick, 815 mm Width, 1140 mm Height
- For John Deere Large Frame G machines only
- 1/2″ thick polycarbonate
- Clear Lexan/Polycarbonate material is impact-resistant
- Increased durability
- Increases operator safety
- Easily replaces OEM factory glass
- Coated on both sides for optimal abrasion-resistance
- Duplicates OEM mounting holes
- Milled edges make swapping out the door seal fast and easy
- 1/2 the weight of glass
- 250 times stronger than glass
- Noise reducing
- Increases light transmission and visibility
- Decreased summer heat gain
- Reduced winter heat loss
- Hardware not included
- Door not manufactured by John Deere.
Warranty
LIMITED WARRANTY
If the windshield/window (i) breaks, (ii) incurs coating failure, (iii) exhibits excessive increased haze, or (iv) exhibits excessive yellowing or loss of light transmission—each within ten (10) years from the date of sale due to manufacturing defect and subject to the definitions and conditions set forth herein—the purchaser will receive a free replacement windshield/window, provided the failed windshield/window, original sales receipt, and this warranty are returned to the original dealer. If a replacement windshield/window cannot be provided within fourteen (14) days, the manufacturer may opt to refund the original windshield/window purchase price.
CONDITIONS
This warranty applies only when the windshield/window is used in flat vertical architectural glazing, excluding transportation, outdoor recreational, and off-road vehicle applications. The product must be cleaned according to recommended guidelines (see reverse side for cleaning instructions). This warranty does not cover (re)installation expenses or any other direct or indirect loss(es) resulting from windshield/window failure.
Breakage: The warranty against breakage applies only to a windshield/window fabricated, installed, and cleaned according to recommendations. The windshield/window is substantially stronger than acrylic and resists impact, abuse, and vandalism. However, no material can be described as unbreakable, as all use cases cannot be accounted for.
Coating Failure: The warranty covers coating failure when the abrasion-resistant surface treatment visibly flakes or loses adhesion to the substrate sheet, detectable without instruments.
Abrasion Resistance: The windshield/window will not exhibit an increase in haze of more than 15%.
Test Criteria: The sample as manufactured shall be abraded per ANSI Z26.1 (Taber Abrader, Test No. 17) for 100 cycles with a 500g load.
Yellowing and Light Transmission: This applies only to clear, transparent windshield/windows.
-
The Yellowness Index (YI) shall be less than 5.0 within five years and less than 10 within ten years from sale date, per ASTM D1925 (1977), as measured with a Gardner Colorimeter.
-
Light transmission loss shall not exceed 5% within five years and 7% within ten years, per ASTM D1003 testing protocols.
-
This warranty does not cover yellowing or light transmission losses due to dirt, atmospheric deposits, abrasion, or physical changes unrelated to material degradation. Regular cleaning reduces, but does not prevent, this effect.
This warranty does not apply to hazing caused by physical abuse or improper cleaning methods.
LIMITATION OF LIABILITY
The warranties stated herein are the only warranties provided and are in lieu of all other warranties—written or oral, statutory, expressed or implied—including any warranty of merchantability or fitness for a particular purpose.
The manufacturer shall not be liable for special, consequential, or incidental damages arising from use or application of the windshield/window, whether the claim is based on warranty, contract, tort, or other legal theory. Liability shall not exceed the original purchase price of the product.
The remedies described are the purchaser’s sole and exclusive remedies.
Installation
Installation video coming soon…it’s done, just waiting on the final product.
*Please note that this door is exactly like replacing glass. All you have to do is remove your hardware and re-install onto the polycarbonate. All holes for your hardware and seal are milled to fit just like your glass.
19 reviews for John Deere G Series Windshield Only
Only logged in customers who have purchased this product may leave a review.
Related products
Kubota Skid Steer Doors
John Deere Skid Steer Doors
Kubota Skid Steer Doors
Accessories - Skid Steer
John Deere Skid Steer Doors
John Deere Excavator Doors
John Deere G/P (60G & 60P) Excavator Windshield Polycarbonate Only
John Deere Skid Steer Doors
Trac-Lock Anti-Theft Device for John Deere Tracked Skid Steers
New Holland Skid Steer Doors
Sam (verified owner) –
Great product,easy installation and fast and friendly service.
Brian Godby (verified owner) –
Spot on fit, fast shipping. So many to choose from and confident we made the correct choice! Couldn’t be happier
Mark Schmieder (verified owner) –
Very pleased with the 1/2″ windshield I ordered for my John Deere 325G. It arrived very quickly, was packaged very well, the workmanship on the milling (milled down to 1/4″ around hinges, seal, etc. to allow the OEM fittings to be used) is excellent and it fit perfect. Actually closes much better than the OEM glass windshield. Would defintely recommend!
Thin Air Logging (verified owner) –
Bought one of these doors for our 333G and couldn’t be more happy with the quality and competitive price! Highly recommend!
Chris Hanes (verified owner) –
Have bought two of these doors both on time and fit perfectly, very durable never going back to glass!
Greg (verified owner) –
As advertised! Fast shipping. Easy install. Very happy with door! Service was great.
Tim Park (verified owner) –
The service was great and the delivery was on time. I’ve already recommended this company to a few people I know. And yes I’d buy from here again!
Sincerely, Tim
Jon Schaefer (verified owner) –
Fits well, delivery was on time. Glad we went with the 1/2″ poly door. Would recommend getting a new seal, we spent as much time cleaning out glass as it would have cost us to get a new seal.