John Deere G Series Windshield Replacement – Tinted

$899.00 – $978.95

✅ Fits the following models: John Deere 320G, 324G, 325G, 330G, 331G, 332G, 333G

🔄 Replaces OEM glass #T344818

Thickness

Model Year

Door Seal

Clear

Model *

Product Description

🚜 Built for tough work and tougher machines, our 1/2″ tinted (50% tint) polycarbonate windshield is a direct-fit replacement for the OEM glass on John Deere Large Frame G Series skid steers. Designed for durability, clarity, and comfort, this windshield doesn’t just protect—it upgrades.

Each door is thermoformed to precisely match OEM specs, including pre-drilled mounting holes for an easy swap using your existing hardware. No custom fitting, no drilling—just a hassle-free installation with a factory-quality fit.

🛡️ Coated with an advanced hard post-coat on both sides, this polycarbonate windshield offers exceptional scratch and abrasion resistance. The tint helps reduce sun glare and cab heat, improving visibility and keeping your workspace cooler in summer and warmer in winter.

💪 Offering 250x the impact strength of glass at only half the weight, this upgrade is built for serious protection on any job site. It also helps reduce cab noise and operator fatigue—features your OEM glass just can’t match.

Mounting & Compatibility Details
This windshield reuses your existing OEM hardware. Mounting hardware is not included with this purchase. Be sure to remove the protective film prior to use—some images may show it still applied.

✅ Fits the following John Deere G Series models:
320G, 324G, 325G, 330G, 331G, 332G, 333G

Upgrade your machine with the rugged clarity and comfort of a polycarbonate door—you’ll see (and feel) the difference. 🌤️

Compatibility

✅ Fits the following John Deere G Series models:
320G, 324G, 325G, 330G, 331G, 332G, 333G

Media

Video coming soon…

Features

Replaces OEM Part T344818
50% Tint Embedded into Polycarbonate
Measurements: 9 Holes, 1/2″ Thick, 815 mm Width, 1140 mm Height
For John Deere Large Frame G machines only
1/2″ thick polycarbonate
Clear Lexan/Polycarbonate material is impact-resistant
Increased durability
Increases operator safety
Easily replaces OEM factory glass
Coated on both sides for optimal abrasion-resistance
Duplicates OEM mounting holes
Milled edges make swapping out the door seal fast and easy
1/2 the weight of glass
250 times stronger than glass
Noise reducing
Increases light transmission and visibility
Decreased summer heat gain
Reduced winter heat loss
Hardware not included
Door not manufactured by John Deere.

Warranty

LIMITED WARRANTY

If the windshield/window (i) breaks, (ii) incurs coating failure, (iii) exhibits excessive increased haze, or (iv) exhibits excessive yellowing or loss of light transmission—each within ten (10) years from the date of sale due to manufacturing defect and subject to the definitions and conditions set forth herein—the purchaser will receive a free replacement windshield/window, provided the failed windshield/window, original sales receipt, and this warranty are returned to the original dealer. If a replacement windshield/window cannot be provided within fourteen (14) days, the manufacturer may opt to refund the original windshield/window purchase price.

CONDITIONS

This warranty applies only when the windshield/window is used in flat vertical architectural glazing, excluding transportation, outdoor recreational, and off-road vehicle applications. The product must be cleaned according to recommended guidelines (see reverse side for cleaning instructions). This warranty does not cover (re)installation expenses or any other direct or indirect loss(es) resulting from windshield/window failure.

Breakage: The warranty against breakage applies only to a windshield/window fabricated, installed, and cleaned according to recommendations. The windshield/window is substantially stronger than acrylic and resists impact, abuse, and vandalism. However, no material can be described as unbreakable, as all use cases cannot be accounted for.

Coating Failure: The warranty covers coating failure when the abrasion-resistant surface treatment visibly flakes or loses adhesion to the substrate sheet, detectable without instruments.

Abrasion Resistance: The windshield/window will not exhibit an increase in haze of more than 15%.
Test Criteria: The sample as manufactured shall be abraded per ANSI Z26.1 (Taber Abrader, Test No. 17) for 100 cycles with a 500g load.

Yellowing and Light Transmission: This applies only to clear, transparent windshield/windows.

The Yellowness Index (YI) shall be less than 5.0 within five years and less than 10 within ten years from sale date, per ASTM D1925 (1977), as measured with a Gardner Colorimeter.
Light transmission loss shall not exceed 5% within five years and 7% within ten years, per ASTM D1003 testing protocols.
This warranty does not cover yellowing or light transmission losses due to dirt, atmospheric deposits, abrasion, or physical changes unrelated to material degradation. Regular cleaning reduces, but does not prevent, this effect.

This warranty does not apply to hazing caused by physical abuse or improper cleaning methods.

LIMITATION OF LIABILITY

The warranties stated herein are the only warranties provided and are in lieu of all other warranties—written or oral, statutory, expressed or implied—including any warranty of merchantability or fitness for a particular purpose.

The manufacturer shall not be liable for special, consequential, or incidental damages arising from use or application of the windshield/window, whether the claim is based on warranty, contract, tort, or other legal theory. Liability shall not exceed the original purchase price of the product.

The remedies described are the purchaser’s sole and exclusive remedies.

Installation

Installation video coming soon…

*Please note that this door is exactly like replacing glass. All you have to do is remove your hardware and re-install onto the polycarbonate. All holes for your hardware and seal are milled to fit just like your glass.