Wacker Neuson ST/SW (2019-2025) Polycarbonate Windshield

$869.00

Fits the following models:

Tracked Skid Steers: ST27, ST31, ST37, ST45, ST50

Wheeled Skid Steers: SW16, SW17, SW20, SW21, SW24, SW28, SW32

Replaces OEM Glass # 1000440928

Only fits serial numbers WNCS0506ZPUM01896 and above.

⚠️ Important: Always confirm both the OEM glass number and your machine’s serial number before ordering to ensure proper fit. ⚠️

Lead Time:

7 to 10 Business Days

Product Description

🚜 Wacker Neuson ST / SW Polycarbonate Windshield

Upgrade your Wacker Neuson skid steer with our precision-crafted ½″-thick clear or 50% tinted polycarbonate windshield, engineered to replicate OEM form and deliver superior durability, clarity, and safety. This replacement fits tracked models ST27, ST31, ST37, ST45, ST50 and wheeled models SW16, SW17, SW20, SW21, SW24, SW28, SW32. It replaces the original glass part numbers as follows:

For serial WNCS0506ZPUM01896 and above, you may choose this version (glass # 1000440928)

⚠️ Please verify both the equipment serial number and your existing glass number before placing your order. ⚠️

Key Features & Benefits:

Constructed from clear or 50% tinted Lexan / optical-grade polycarbonate, which is impact-resistant
Coated on both sides for optimal abrasion resistance
Matches OEM mounting hole locations for a drop-in fit
Milled edges simplify swapping hardware and existing parts
Up to 250× stronger than glass
Provides noise reduction, increased light transmission, reduced summer heat gain, and improved winter insulation
Easily replaces the OEM factory glass

Please note: Hardware is not included, and this windshield is not produced by Wacker Neuson—it is offered as a direct-fit aftermarket replacement for your current glass or polycarbonate windshield.

Compatibility

Replacement Polycarbonate Windshield – Wacker Neuson Skid Steers

Upgrade your machine with a heavy-duty polycarbonate windshield — engineered as a direct replacement for OEM glass and built to deliver maximum impact resistance, clarity, and durability.

✅ Compatible Wacker Neuson Models

Tracked (Compact Track Loaders):

ST27, ST31, ST37, ST45, ST50

Wheeled Skid Steers:

SW16, SW17, SW20, SW21, SW24, SW28, SW32

📦 OEM Replacement Info

This windshield is a direct substitute for OEM glass part #1000440928
(ONLY for machines with serial numbers WNCS0506ZPUM01896 and above).

✔️ Important: This product is made from optical-grade polycarbonate, which is 250× stronger than glass and purpose-built for forestry, demolition, and heavy-duty environments — a significant upgrade over standard OEM glass.

Key Features

½″ Optical-Grade Polycarbonate (Lexan®) construction for superior clarity and strength
Available in Clear or 50% Tinted options
Dual-Sided Coating provides enhanced resistance to scratches and abrasion
Impact Strength: up to 250× stronger than glass—won’t crack, chip, or shatter
OEM-Compatible Fit — matches factory mounting holes for easy, direct replacement
Precision-Milled Edges allow quick, clean installation of door hardware
Comfort Upgrade: reduces noise, minimizes heat gain in summer, and retains warmth in winter
High Light Transmission improves visibility and operator awareness
Safety First: eliminates risks of broken glass for a safer cab environment

Warranty

LIMITED WARRANTY

If the windshield/window (i) breaks, (ii) incurs coating failure, (iii) exhibits excessive increased haze, or (iv) exhibits excessive yellowing or loss of light transmission—each within ten (10) years from the date of sale due to manufacturing defect and subject to the definitions and conditions set forth herein—the purchaser will receive a free replacement windshield/window, provided the failed windshield/window, original sales receipt, and this warranty are returned to the original dealer. If a replacement windshield/window cannot be provided within fourteen (14) days, the manufacturer may opt to refund the original windshield/window purchase price.

CONDITIONS

This warranty applies only when the windshield/window is used in flat vertical architectural glazing, excluding transportation, outdoor recreational, and off-road vehicle applications. The product must be cleaned according to recommended guidelines (see reverse side for cleaning instructions). This warranty does not cover (re)installation expenses or any other direct or indirect loss(es) resulting from windshield/window failure.

Breakage: The warranty against breakage applies only to a windshield/window fabricated, installed, and cleaned according to recommendations. The windshield/window is substantially stronger than acrylic and resists impact, abuse, and vandalism. However, no material can be described as unbreakable, as all use cases cannot be accounted for.

Coating Failure: The warranty covers coating failure when the abrasion-resistant surface treatment visibly flakes or loses adhesion to the substrate sheet, detectable without instruments.

Abrasion Resistance: The windshield/window will not exhibit an increase in haze of more than 15%.
Test Criteria: The sample as manufactured shall be abraded per ANSI Z26.1 (Taber Abrader, Test No. 17) for 100 cycles with a 500g load.

Yellowing and Light Transmission: This applies only to clear, transparent windshield/windows.

The Yellowness Index (YI) shall be less than 5.0 within five years and less than 10 within ten years from sale date, per ASTM D1925 (1977), as measured with a Gardner Colorimeter.
Light transmission loss shall not exceed 5% within five years and 7% within ten years, per ASTM D1003 testing protocols.
This warranty does not cover yellowing or light transmission losses due to dirt, atmospheric deposits, abrasion, or physical changes unrelated to material degradation. Regular cleaning reduces, but does not prevent, this effect.

This warranty does not apply to hazing caused by physical abuse or improper cleaning methods.

LIMITATION OF LIABILITY

The warranties stated herein are the only warranties provided and are in lieu of all other warranties—written or oral, statutory, expressed or implied—including any warranty of merchantability or fitness for a particular purpose.

The manufacturer shall not be liable for special, consequential, or incidental damages arising from use or application of the windshield/window, whether the claim is based on warranty, contract, tort, or other legal theory. Liability shall not exceed the original purchase price of the product.

The remedies described are the purchaser’s sole and exclusive remedies.