Your cart is empty
Continue Shopping

This is an aftermarket replacement for Caterpillar OEM glass #281-4140, the right-hand cab door glass on Caterpillar D3K, D4K, D5K and D6K track-type tractors and the PL61 pipelayer.
The pane is 5mm green-tinted tempered safety glass with a black ceramic frit, about 748mm wide by 1387mm high (29.46" × 54.6"; 55.26" overall length per Caterpillar), with 5 holes.
Fits the following Caterpillar models:
K Series Dozers: D3K XL, D3K LGP, D4K XL, D4K LGP, D5K XL, D5K LGP, D6K, D6K XL, D6K LGP
Pipelayer: PL61
OEM Replacement
Replaces Caterpillar OEM Glass #281-4140
This is real tempered glass, the same material type as the factory door glass, not plastic. It resists scratches and keeps its clarity much longer than polycarbonate, and breaks into small, blunt pieces if struck.
This listing is the glass pane only; hinges, pull handle, latch, seals and hardware are not included. Caterpillar's parts store lists the 252-1863 pull handle gasket and the 287-0548 door seal film alongside this glass; reuse or replace them as needed, since neither comes with the pane.
Not Included: hinges, pull handle, latch, seals or hardware.
Caterpillar's parts store lists 281-4140 as the right-hand (RH) door glass. The left-hand door takes 281-4141, which is the same 1386.80mm height, so confirm the side before you order.
Yes. Caterpillar's parts store and Southeastern Equipment both list 281-4140 for the PL61 pipelayer as well as the D3K–D6K tractors. Neither lists the left-hand door glass, 281-4141, for the PL61.
Caterpillar lists the D3K–D6K front windshield, 247-6582, as 6.8mm green laminated safety glass. The doors are listed as 5mm green heat-treated glass, which sellers describe as tempered.
Besides the two doors (281-4140 right, 281-4141 left), Caterpillar lists the 247-6582 front windshield and the 247-6583 rear glass, a 5mm pane about 35.79" wide by 50.46" long, for the same models.
The D3K, D4K and D5K maintenance schedule has you inspect the right and left wiper blades along with the front and rear, and replace any blade that is worn or streaks the window. It also calls for a commercial window cleaning solution and, in freezing weather, a nonfreezing washer solvent.
Please Verify Fitment Before Ordering
Confirm OEM part number 281-4140 by your machine's serial number before ordering. Call 765-310-3053 with fitment questions.
Caterpillar® is a registered trademark of Caterpillar Inc. Forestry Doors is not affiliated with Caterpillar; OEM numbers are listed for cross-reference only.