John Deere Front Upper Glass – Replaces OEM #FYD00004957
This is a new aftermarket front upper tempered safety glass that replaces John Deere OEM #FYD00004957. It fits John Deere 60G and 60P compact excavator cabs (also listed for Hitachi ZX60USB-5N) and installs in the upper front window of the cab.
The panel is tempered glass: 5 mm (0.20 in) thick, 800 mm wide × 851 mm high (31.50 × 33.50 in), green tint, DOT certified, 1 mounting hole.
Fits the following John Deere models:
John Deere Mini Excavators:
60G & 60P
Also listed for Hitachi Excavators:
ZX60USB-5N
OEM Replacement
Replaces John Deere OEM Glass #FYD00004957
Product Features
- Glass Type: Tempered safety glass (not polycarbonate)
- Thickness: 5 mm (0.20 in)
- Width: 800 mm (31.50 in)
- Height: 851 mm (33.50 in)
- Tint: Green
- Certification: DOT Certified
- Mounting Holes: 1
- Location: Front Upper cab glass
- Condition: New aftermarket replacement glass
Tempered Glass vs. Polycarbonate
This is tempered glass, the same material type used by the factory, so it keeps its clarity and resists scratches from wipers, dust and cleaning far better than polycarbonate. If tempered glass breaks, it crumbles into small, blunt pieces instead of large sharp shards. For forestry mulching, demolition or other work with flying debris, consider an impact-resistant polycarbonate panel instead — see our John Deere excavator polycarbonate windshields and doors.
Installation Information
This listing is the glass panel only. Rubber seal, frame and hardware are not included; reuse your existing seal if it is in good condition or replace it at the same time. Professional installation is recommended.
What's Included
- (1) John Deere front upper tempered glass panel – replaces OEM #FYD00004957
Not Included: seal, frame, mounting hardware and adhesive.
Frequently Asked Questions
Is there a Hitachi part number for this glass?
Websites cross-reference FYD00004957 to Hitachi YD00006271 for the ZX60USB-5N. Confirm the number on your machine before ordering.
Will this fit my older John Deere 60D?
No. Deere says the G-series front glass is 2" wider and 6" taller than on previous models, so it is sized for the 60G and 60P cab.
Can I add a guard to protect the front glass?
Deere offers an optional front screen for the 60G cab to help prevent glass damage. A screen or polycarbonate panel makes sense for brush or demolition work.
What glass goes below this pane?
The front lower glass is a separate part, FYD00004958 (about 800 × 533 mm).
How many holes does it have?
One mounting hole. The glass is 5 mm (0.20") thick, 800 × 851 mm.
Please Verify Fitment Before Ordering
Confirm that OEM part number FYD00004957 matches your machine by serial number before ordering. Cab glass can change between serial ranges.
John Deere® is a registered trademark of Deere & Company. Forestry Doors is not affiliated with John Deere; OEM numbers are listed for cross-reference only.
