John Deere Rear Window Glass – Replaces OEM #FYD00005006
This is a new aftermarket rear window tempered safety glass that replaces John Deere OEM #FYD00005006. It fits John Deere 60G and 60P compact excavator cabs and installs in the fixed rear window of the cab.
The panel is tempered glass: 4 mm (0.16 in) thick, 841 mm wide × 623 mm high (33.11 × 24.53 in), green tint, DOT certified, no mounting holes.
Fits the following John Deere models:
John Deere Mini Excavators:
60G & 60P
OEM Replacement
Replaces John Deere OEM Glass #FYD00005006
Product Features
- Glass Type: Tempered safety glass (not polycarbonate)
- Thickness: 4 mm (0.16 in)
- Width: 841 mm (33.11 in)
- Height: 623 mm (24.53 in)
- Tint: Green
- Certification: DOT Certified
- Mounting Holes: 0
- Location: Rear Window cab glass
- Condition: New aftermarket replacement glass
Tempered Glass vs. Polycarbonate
This is tempered glass, the same material type used by the factory, so it keeps its clarity and resists scratches from wipers, dust and cleaning far better than polycarbonate. If tempered glass breaks, it crumbles into small, blunt pieces instead of large sharp shards. For forestry mulching, demolition or other work with flying debris, consider an impact-resistant polycarbonate panel instead — see our John Deere excavator polycarbonate windshields and doors.
Installation Information
This listing is the glass panel only. Rubber seal, frame and hardware are not included; reuse your existing seal if it is in good condition or replace it at the same time. Professional installation is recommended.
What's Included
- (1) John Deere rear window tempered glass panel – replaces OEM #FYD00005006
Not Included: seal, frame, mounting hardware and adhesive.
Frequently Asked Questions
Is the rear window an emergency exit on the 60G?
Deere lists a rear secondary exit kit as an option on the 35G, 50G and 60G. Check whether your machine has one before you replace the rear glass.
Why isn't the rear glass a rectangle?
It is 840 mm at its widest and 640 mm at its narrowest, 625 mm tall, so the sides are not parallel. Compare the shape with your old pane.
Does the rear window open?
No. It is a fixed, rearward-facing panel with no mounting holes.
Is this the left side window?
No. FYD00005006 is the rear window; the left side window is FYD00005004.
Is the 4 mm rear glass strong enough for brush work?
It is tempered glass, the same material type as factory. For mulching or flying debris, consider polycarbonate protection.
Please Verify Fitment Before Ordering
Confirm that OEM part number FYD00005006 matches your machine by serial number before ordering. Cab glass can change between serial ranges.
John Deere® is a registered trademark of Deere & Company. Forestry Doors is not affiliated with John Deere; OEM numbers are listed for cross-reference only.
